Indventech - Plastec Series Carbon Impregnated Polypropylene (CIP)

Unit of Measure

Items	PLA15CIP Plastec CIP 15 List Price QUOTE	PLA20CIP Plastec CIP 20 List Price QUOTE	PLA25CIP Plastec CIP 25 List Price QUOTE	PLA30CIP Plastec CIP 30 List Price QUOTE
Wheel Diameter	N/A 5.90 in	N/A 7.87 in	N/A 9.84 in	N/A 11.81 in
Application	N/A The PLASTEC® blower is designed to work in highly corrosive air exhaust applications containing potentially explosive atmospheres such as Laboratory Hoods, Chemical Industry, Metal Processing Industries and Water Treatment/Waste Water Treatment Industry processes.
Temperature Limitation	N/A Housing shall be constructed of strong high-density UV treated polypropylene for maximum corrosion resistance. Polypropylene Housing shall be impregnated with Carbon fibers. Housings shall be made of one single piece to completely avoid leaks. Split molded housings are not acceptable. Assembly hardware shall be stainless steel. Housings shall be reversible (except for PLASTEC® 35) and rotatable to any of the 8 standard discharge positions. Metal in the air stream will not be tolerated.
Housing	N/A Housing shall be constructed of strong high-density UV treated polypropylene for maximum corrosion resistance. Polypropylene Housing shall be impregnated with Carbon fibers. Housings shall be made of one single piece to completely avoid leaks. Split molded housings are not acceptable. Assembly hardware shall be stainless steel. Housings shall be reversible (except for PLASTEC® 35) and rotatable to any of the 8 standard discharge positions. Metal in the air stream will not be tolerated.
Impeller/Wheel	N/A Impellers/Wheels shall be forward-curved type and constructed of uniformly molded carbon fiber impregnated polypropylene blades. Impellers/Wheels shall be both electronically and dynamically balanced. Blower Impellers/Wheels shall be supplied with an integral motor shaft bushing made of carbon fiber impregnated polypropylene. Impellers/Wheels shall be supplied with Polypropylene Hubcap to protect end of motor shaft. Impellers are rated for RPM up to 3450 on models PLASTEC® 15, 20 and 25 and up to 1725 RPM on Models PLASTEC® 30 and 35. Optional 304 Stainless Steel Impellers available on most models.
Motor Support	N/A Standard stand to be constructed of galvanized steel with enamel coating. Optional polypropylene motor support or grey powder coated cast aluminum motor support for complete motor protection shall be provided as specified.
Conductive	N/A Housing Assembly shall be conductive to allow grounding to earth.
Anti-Static	N/A Impeller/Wheel shall be effectively grounded to earth when installed on the motor shaft through the motor grounding. Housing shall be grounded to earth as specified by local electrical code.
Grounding	N/A Impeller/Wheel shall be effectively grounded to earth when installed on the motor shaft through the motor grounding. Housing shall be grounded to earth as specified by local electrical code.
Spark Resistant	N/A Blower and Impeller shall be constructed of spark-resistant material.
ATEX	N/A Plastec® Carbon fiber Impregnated Blowers meet Declaration of Conformity for applications with explosive atmospheres as required.
Motors	N/A Fan performance shall be based on tests conducted in accordance with AMCA 210-85 and ISO 5801.
Performance	N/A Fan performance shall be based on tests conducted in accordance with AMCA 210-85 and ISO 5801.
Warranty	N/A Plastec Ventilation, Inc. warrants its equipment, products and parts, to be free from defects in workmanship and material under normal use and service for two years after delivery to the first user. Motors carry a one year warranty. (See full warranty on page 6 of the Installation, Operation & Maintenance Manual)