Print Back
Model B - Tube Axial Duct Fan - Belt Drive

  • Designed to handle clean dry air to a maximum of 180°F
  • Ideal for fume and smoke removal
  • Long-life maintenance free sealed for life fan bearings
  • Spark-resistant heavy duty cast Al prop
  • Adjustable motor base
  • TEFC or EXP motor
  • Cast iron or turned steel pulleys
  • Optional accessories available
  • Select options below for more information or request a quote
Unit of Measure

Specifications

Power

N/A 1 hp

Performance Data

Fan Size

N/A 30 in

Fan Speed

N/A 1298 rpm

Free Air

N/A 9897

Capacity at 1/8 Inch (in) Static Pressure

N/A 8970 ft³/min

Capacity at 1/4 Inch (in) Static Pressure

N/A 7980 ft³/min

Capacity at 3/8 Inch (in) Static Pressure

N/A 6050 ft³/min

Capacity at 1/2 Inch (in) Static Pressure

N/A 4120 ft³/min

Outstanding Features

Outstanding Features

N/A
  • Fans can be installed to operate in any position.
  • Propellers non-sparking cast aluminum (steel available on request).
  • Fan Housing is heavy gauge steel with angle iron rings welded on each end of superior strength.
  • Eight holes in angle rings for easy mounting.
  • Air tight cylinder in center of drum protects belts, sheaves, and bearings from contaminated air.
  • Adjustable motor base provides for proper belt tension.
  • Bearings - two sealed industrial grade ball bearings mounted in a precision machined, cast aluminum, one piece, completely enclosed bearing housing for exceptional bearing life. External grease fitting is standard.
  • Motors - only high quality industrial motors are used. Fans with motors are completely assembled, drives properly adjusted and fan tested at factory before shipping.

Accessories and Options

Accessories and Options

N/A
  • Companion Flanges - For easy installation of duct fans.
  • Protective Coatings - Epoxy and Eisenheiss coatings provide good protection against most corrosive agents.
  • Variable Pitch Pulleys - Allow for moderate variation of fan speed for flexibility and system modification.
  • Access Doors - Hinged access doors, gasketed and latched, provide for periodic inspections.
  • Belt Guards - Adjustable, galvanized construction.
  • Motor Covers - Galvanized, designed to fit all belt drive tube axial duct fans. (Specify motor frame size.)
  • Fan Guards - 1/2" O.S.H.A. approved safety guards for use on fan inlet or outlet.