Print Back
Model 900 Direct Drive Exhaust Fans

  • Higher static pressure applications for fume, smoke or dust removal
  • Dependable performance with little maintenance
  • Cast AL spark resistant prop
  • Optional EXP motor for hazardous locations
  • Select options below for more information or request a quote
Model-900
Unit of Measure
Items Model-900
912-1/4
930 Cubic Feet Per Minute (ft³/min) Capacity at 1/8 Inch (in) Static Pressure Direct Drive 900 Series Industrial Exhaust Panel Fan
Model-900
916-1/4
2400 Cubic Feet Per Minute (ft³/min) Capacity at 1/8 Inch (in) Static Pressure Direct Drive 900 Series Industrial Exhaust Panel Fan
Model-900
L-916-1/4
1700 Cubic Feet Per Minute (ft³/min) Capacity at 1/8 Inch (in) Static Pressure Direct Drive 900 Series Industrial Exhaust Panel Fan
Model-900
918-1/3
3000 Cubic Feet Per Minute (ft³/min) Capacity at 1/8 Inch (in) Static Pressure Direct Drive 900 Series Industrial Exhaust Panel Fan
Model-900
918-1/2
3850 Cubic Feet Per Minute (ft³/min) Capacity at 1/8 Inch (in) Static Pressure Direct Drive 900 Series Industrial Exhaust Panel Fan
Power N/A 1/4 hp N/A 1/4 hp N/A 1/4 hp N/A 1/3 hp N/A 1/2 hp
Fan Size N/A 12 in N/A 16 in N/A 16 in N/A 18 in N/A 18 in
Fan Speed N/A 1725 rpm N/A 1725 rpm N/A 1150 rpm N/A 1725 rpm N/A 1725 rpm
Number of Blades N/A 4 N/A 6 N/A 6 N/A 6 N/A 6
Prop Number N/A CA101 N/A CA159 N/A CA160 N/A CA106 N/A CA161
Free Air N/A 1180 N/A 2800 N/A 2100 N/A 3375 N/A 4150
Capacity at 1/8 Inch (in) Static Pressure N/A 930 ft³/min N/A 2400 ft³/min N/A 1700 ft³/min N/A 3000 ft³/min N/A 3850 ft³/min
Capacity at 1/4 Inch (in) Static Pressure N/A 520 ft³/min N/A 2000 ft³/min N/A 500 ft³/min N/A 2600 ft³/min N/A 3150 ft³/min
Capacity at 3/8 Inch (in) Static Pressure N/A N/A 1400 ft³/min N/A N/A 2000 ft³/min N/A 2800 ft³/min
Capacity at 1/2 Inch (in) Static Pressure N/A N/A 700 ft³/min N/A N/A 1400 ft³/min N/A 1700 ft³/min
Capacity at 3/4 Inch (in) Static Pressure N/A
Capacity at 1 Inch (in) Static Pressure N/A
Capacity at 1 1/4 Inch (in) Static Pressure N/A
Capacity at 1 1/2 Inch (in) Static Pressure N/A
Applications N/A These direct driven high pressure exhaust fans are recommended for use in mills, mines, foundries and factories wherever fumes, dust, or smoke must be removed and high static pressures are required.
Propellers N/A Heavy-duty one-piece cast aluminum to provide non-sparking feature. Mounted to motor shaft and keywayed to shaft with set screws. If required performance falls outside the standard casting's range, we can provide adjustable pitch as needed.
Frame N/A Heavy-duty steel venture frame completely arc welded with tubular supports. Painted gray enamel.
Motor N/A Ball bearing. TEFC or Explosion Proof as specified.
Accessories and Options N/A
  • Protective Coatings - Epoxy and Eisenheiss coatings provide good protection against most corrosive agents.
  • Fan Guards - Front and rear.
  • Automatic shutters.
  • Manually and motor operated shutters.
  • Fan and shutter mounting boxes.
  • Roof mounted penthouses.