Exit
STORM Series

Designed to exhaust fumes from highly corrosive environments with 4 sizes available from 3" to 6" inlet/outlet. It is an excellent system for Scrubber Applications and other systems requiring low airflow at a higher static pressure. Suitable for many applications such as acid tank ventilation, hood exhaust, commercial washers wastewater, chemical cabinets/rooms, etc.
Unit of Measure

Specifications

Wheel Diameter

N/A 7.75 in

Application

Application

N/A
The STORM Series blower is designed to work in highly corrosive air applications such as laboratory exhaust or the chemical industry, especially those with higher static pressure and lower volume air flow.

Temperature Limitation

Temperature Limitation

N/A
Polypropylene casing and wheel recommended 140° F constant and up to 190° F for short periods of time.

Housing

Housing

N/A
Housing shall be constructed of strong high-density UV treated polypropylene for maximum corrosion resistance. Housing shall be made of one single piece to completely avoid leaks. Split molded housings are not acceptable. Screws holding housing to back plate shall be stainless steel. Housing shall be rotatable to any of the 8 standard discharge positions. Metal in the air stream will not be tolerated. Optional carbon fiber impregnated polypropylene housing available when specified. See Submittal Data/Specifications for Explosion-Proof Series.

Impeller/Wheel

Impeller/Wheel

N/A
Standard stand to be manufactured in galvanized steel with enamel coating. Optional polypropylene motor support or grey powder coated cast aluminum motor support for complete motor protection shall be provided as specified.

Motor Support

Motor Support

N/A
Standard stand to be manufactured in galvanized steel with enamel coating. Optional polypropylene motor support or grey powder coated cast aluminum motor support for complete motor protection shall be provided as specified.

Motors

Motors

N/A
Motors shall be direct drive and of heavy-duty ball bearing type for continuous duty with voltage as specified. Motors shall be totally enclosed fan cooled (TEFC). Optional Explosion-Proof Motors available (see Submittal Data/Specifications for PLASTEC® Explosion-Proof Series). Motor shall be UL and CSA approved for safety.

Performance

Performance

N/A Fan performance shall be based on tests conducted in accordance with AMCA 210-85 and ISO 5801.

Warranty

Warranty

N/A
Plastec Ventilation, Inc. warrants its equipment, products and parts, to be free from defects in workmanship and material under normal use and service for two years after delivery to the first user. Motors carry a one year warranty. (See full warranty on page 6 of the Installation, Operation & Maintenance Manual)