Indventech LLC
Indventech LLC
www.indventech.com
1361 W. Wade Hampton Blvd Ste F-135 Greer, SC 29650
888-864-4344
sales@indventech.com
Print Back
Model 600/700 Commercial Duty Exhaust Fan

  • Factory or warehouse ventilation
  • Economical light duty for general exhaust or intake requirements
  • Belt driven for quiet operation
  • Sealed bearings
  • TEFC Motor
  • Select options below for more information or request a quote
Model-600-700
Unit of Measure
Items Model-600-700
624-1/3-1
825 Revolutions Per Minute (rpm) Fan Speed Belt Drive 600 Series Commercial Exhaust Panel Fan 		Model-600-700
624-1/2-1
925 Revolutions Per Minute (rpm) Fan Speed Belt Drive 600 Series Commercial Exhaust Panel Fan 		Model-600-700
624-3/4-1
1050 Revolutions Per Minute (rpm) Fan Speed Belt Drive 600 Series Commercial Exhaust Panel Fan 		Model-600-700
624-1-1
1175 Revolutions Per Minute (rpm) Fan Speed Belt Drive 600 Series Commercial Exhaust Panel Fan 		Model-600-700
630-1/3-1
570 Revolutions Per Minute (rpm) Fan Speed Belt Drive 600 Series Commercial Exhaust Panel Fan
Blade Diameter N/A 24 in N/A 24 in N/A 24 in N/A 24 in N/A 30 in
Voltage N/A 230 V460 V
Number of Phase N/A 1
Panel Size (SQ.) N/A 30 in N/A 30 in N/A 30 in N/A 30 in N/A 36 in
Power N/A 1/3 hp N/A 1/2 hp N/A 3/4 hp N/A 1 hp N/A 1/3 hp
Fan Speed N/A 825 rpm N/A 925 rpm N/A 1050 rpm N/A 1175 rpm N/A 570 rpm
Capacity at 0 Inch (in) Static Pressure N/A 5300 ft³/min N/A 6200 ft³/min N/A 7000 ft³/min N/A 7800 ft³/min N/A 7500 ft³/min
Capacity at 1/8 Inch (in) Static Pressure N/A 4700 ft³/min N/A 5700 ft³/min N/A 6600 ft³/min N/A 7400 ft³/min N/A 6000 ft³/min
Capacity at 1/4 Inch (in) Static Pressure N/A 3800 ft³/min N/A 5000 ft³/min N/A 6000 ft³/min N/A 6900 ft³/min N/A 3400 ft³/min
Capacity at 1/2 Inch (in) Static Pressure N/A 2200 ft³/min N/A 4000 ft³/min N/A 4400 ft³/min N/A 5700 ft³/min N/A 700 ft³/min
Capacity at 3/4 Inch (in) Static Pressure N/A 1400 ft³/min N/A 2600 ft³/min N/A 3000 ft³/min N/A 3500 ft³/min N/A
Blade Material N/A Steel
Construction Details N/A
  • 24" to 60" sizes available with 115/230 V 1 PH or 230/460 V 3 PH motors: ball bearing, permanently lubricated, continuous duty.
  • 16 gauge steel venturi with tubular steel bracing.
  • Steel blades.
  • Bearings-ball, sealed, pillow blocks.
  • Industrial gray enamel finish.
  • Fans shipped completely assembled, factory tested and adjusted, ready to install.
  • Economical fans for light-duty exhaust applications.
  • NOT suitable for air intake or explosion proof applications.
Accessories and Options N/A
  • Protective Coatings - Epoxy and Eisenheiss coatings provide good protection against most corrosive agents. Hot dip galvanized finish also available.
  • Fan Guards - Front and rear.
  • Automatic shutters.
  • Manually and motor operated shutters.
  • Fan and shutter mounting boxes.
  • Roof mounted penthouses.
  • Variable pulleys.