Exit
Search
Search
Request Information Request CAD Files
Model BRV - Industrial Roof Exhausters - Belt Drive

  • Designed for smoke, heat, and fume removal
  • Utilizes Model B tube axial duct fan
  • Spark-resistant Al prop standard
  • Heavy gauge curb cap continuously welded
  • Removable gravity butterfly damper section for easy prop access
  • Combination weather cover/belt guard
  • Motor components located outside airstream
  • Select options below for more information or request a quote
Unit of Measure

Specifications

Power

 N/A 2 hp

Performance Data

Fan Size

 N/A 34 in

Fan Speed

 N/A 1027 rpm

Number of Blades

 N/A 6

Prop Number

 N/A CA146

Free Air

 N/A 14657

Capacity at 1/8 Inch (in) Static Pressure

 N/A 13652 ft³/min

Capacity at 1/4 Inch (in) Static Pressure

 N/A 12590 ft³/min

Capacity at 3/8 Inch (in) Static Pressure

 N/A 11500 ft³/min

Capacity at 1/2 Inch (in) Static Pressure

 N/A 10000 ft³/min

Capacity at 3/4 Inch (in) Static Pressure

 N/A 8000 ft³/min

Applications

Applications

 N/A Used where it is necessary to have the motor removed from the air stream.

Outstanding Features

Outstanding Features

 N/A
  • Model B Tube Axial Duct Fans are standard in BRV Models. In applications where excessive heat or moisture is present, Models BHT or BCS Tube Axial Duct Fans may be incorporated into the roof ventilator.
  • Ruggedly constructed with heavy steel base and galvanized damper section. Galvanized motor cover furnished with the roof ventilator.
  • Model BRV Roof Ventilators are also available in stainless steel, aluminum, and hot dipped galvanized construction.
  • Fan drum is continuously welded to curb cap to prevent leakage.
  • Belt tube is completely sealed to protect sheaves and belts from contaminated air.
  • Cast aluminum, steel, and adjustable propellers are available.
  • Damper section bolts to fan for easy removal.
  • Dampers rotate in nylon bearings on a stainless steel axle.
  • Motor is located outside air stream on adjustable motor base.
  • Extended grease tube lines.
  • Damper sections may be purchased separately for existing stacks.

Accessories and Options

Accessories and Options

 N/A
  • Protective Coatings - Epoxy or Eisenheiss provide good protection against corrosive agents. Hot dip galvanize also available.
  • Prefabricated Curbs - For flat, sloping, or apex roofs. Minimum 8" curb height.
  • Disconnect Switch.