Application |
N/A
The STORM Blower is designed to work in highly corrosive air exhaust applications containing potentially explosive atmospheres such as Laboratory Hoods, Chemical Industry, Metal Processing Industries and Water Treatment/Waste Water Treatment Industry processes. Especially those with higher static pressure and lower air volume requirements.
|
Temperature Limitation |
N/A
Carbon Fiber Impregnated Polypropylene Housing is recommended 140° F constant and up to 190° F for short periods of time. The product has been designed, manufactured and controlled within the guidelines of a quality insurance system in accordance with ISO 9002.
|
Housing |
N/A
Housing shall be constructed of strong high-density UV treated polypropylene for maximum corrosion resistance. Polypropylene Housing shall be impregnated with Carbon fibers. Housings shall be made of one single piece to completely avoid leaks. Split molded housings are not acceptable. Assembly hardware shall be stainless steel. Housings shall be rotatable to any of the 8 standard discharge positions. Metal in the air stream will not be tolerated.
|
Impeller/Wheel |
N/A
Standard stand to be constructed of galvanized steel with enamel coating. Optional polypropylene motor support or grey powder coated cast aluminum motor support for complete motor protection shall be provided as specified.
|
Motor Support |
N/A
Standard stand to be constructed of galvanized steel with enamel coating. Optional polypropylene motor support or grey powder coated cast aluminum motor support for complete motor protection shall be provided as specified.
|
Anti-Static |
N/A
Blowers shall be static resistant (anti-static) to greatly reduce the risk of discharge of electrostatic energy.
|
Grounding |
N/A
Impellers/Wheels shall be effectively grounded to earth when installed on the motor shaft through the motor grounding. Housing shall be grounded to earth as specified by local electrical code.
|
Spark Resistant |
N/A
PLASTEC® Carbon fiber Impregnated Blowers meet Declaration of Conformity for applications with explosive atmospheres as required.
|
ATEX |
N/A
PLASTEC® Carbon fiber Impregnated Blowers meet Declaration of Conformity for applications with explosive atmospheres as required.
|
Motors |
N/A
Motors shall be direct drive and of heavy-duty ball bearing type for continuous duty with voltage and phase as specified. Motors shall be EPFC (Explosion-Proof Fan Cooled). Motor shall be Class I Group C and D, Class II Group F and G, Division I and Division II as specified. Motor shall be UL and CSA approved for safety. IEC Ex motors for applications requiring ATEX (European Standards for explosive atmospheres conformity) motors are available as specified.
|
Performance |
N/A
Plastec Ventilation, Inc. warrants its equipment, products and parts, to be free from defects in workmanship and material under normal use and service for two years after delivery to the first user. Motors carry a one year warranty. (See full warranty on page 6 of the Installation, Operation & Maintenance Manual)
|
Warranty |
N/A
Plastec Ventilation, Inc. warrants its equipment, products and parts, to be free from defects in workmanship and material under normal use and service for two years after delivery to the first user. Motors carry a one year warranty. (See full warranty on page 6 of the Installation, Operation & Maintenance Manual)
|
