Exit
Search
Search
Request Information
Plastec Series Centrifugal Fan

  • Designed to exhaust fumes from highly acidic and corrosive environments
  • All polypropylene construction
  • Direct drive arr. 4
  • Max recommended operation temperature 140°F 
  • Injection molded backward inclined non-overloading type wheel
  • Continuous duty TEFC motor or EXP when specified
  • Supplied with pre-programmed VFD/inverter
  • Performance tests in accordance with AMCA 210-85 and ISO 5801
  • Two year warranty after delivery to first user; motors one year warranty
  • Select options below for more information or request a quote
Unit of Measure

Specifications

Wheel Diameter

 N/A 5.90 in

Temperature Limitation

Temperature Limitation

 N/A

Polypropylene casing and wheel recommended 140° F constant and up to 190° F for short periods of time.

Impeller/Wheel

Impeller/Wheel

 N/A Impeller/ Wheels shall be of forward-curved type and constructed of uniformly molded polypropylene blades. Impeller/Wheels
shall be both electronically and dynamically balanced. Blower impeller/wheel shall be supplied with a motor shaft bushing and
hubcap made of polypropylene to protect shaft end. Blower impeller/wheel shall be suitable for RPM of up to 3450 on models
PLASTEC® 15, 20 and 25, and up to 1725 on models PLASTEC® 30 and 35. Optional 304 stainless steel wheel is available for
models PLASTEC® 20, 25, 30 & 35 when specified.

Application

Application

 N/A Motors shall be direct drive and of heavy-duty ball bearing type for continuous duty with voltage as specified. Motors shall be
totally enclosed fan cooled (TEFC). Optional explosion-proof motors available (see Submittal/Specifications Data for PLASTEC®
Explosion-Proof Series). Motor shall be UL and CSA approved for safety.

Motor Support

Motor Support

 N/A Motors shall be direct drive and of heavy-duty ball bearing type for continuous duty with voltage as specified. Motors shall be
totally enclosed fan cooled (TEFC). Optional explosion-proof motors available (see Submittal/Specifications Data for PLASTEC®
Explosion-Proof Series). Motor shall be UL and CSA approved for safety.

Motors

Motors

 N/A Fan performance shall be based on tests conducted in accordance with AMCA 210-85 and ISO 5801.

Performance

Performance

 N/A Fan performance shall be based on tests conducted in accordance with AMCA 210-85 and ISO 5801.

Warranty

Warranty

 N/A Plastec Ventilation, Inc. warrants its equipment, products and parts, to be free from defects in workmanship and material under normal use and service for two years after delivery to the first user. Motors carry a one year warranty. (See full warranty on page 6 of the Installation, Operation & Maintenance Manual)